Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.