Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
HR/F
Home Runs per Fly ball is: HR / (HR + Flyouts).
BB%
Walk rate = BB / PA
K%
Strikeout rate = K / PA
K/BB
Strikeouts per Walk = K / BB
PA
AB
BB
SF
K
G
F
1B
2B
3B
HR
TB
R
RBI
H
ROB
CR
BA
BABIP
BACON
SPD
RS%
OBP
SLG
OPS
ISO
SecA
wOBA
wRAA/PA
wRAA
wRC/PA
wRC
TTO%
OBI%
AB/HR
HR/1B
R/PA
RBI/PA
R/HR
RBI/HR
Go/Fo
HR/F
BB%
K%
K/BB
None On vs. Runners On
-254
-223
-33
2
3
-73
-103
-28
2
-2
-20
-110
-62
196
-48
924
-0.026
0.043
0.057
0.050
-0.3
-0.06
0.026
0.070
0.096
0.017
0.002
0.028
0.038
30.1
0.038
-29.7
0.011
-
-0.5
-0.04
-0.00
0.33
-0.19
3.00
0.278
0.062
-0.022
0.026
0.909
Late Inning Improvement
-832
-777
-53
-2
-59
-235
-199
-178
-22
-8
-78
-558
-204
-204
-286
-518
0.004
-0.012
-0.025
-0.008
-0.6
-0.05
-0.013
0.012
-0.000
0.034
0.020
-0.008
-0.011
-6.4
-0.011
-202.2
0.005
-0.015
-0.9
0.10
-0.01
-0.01
-0.37
-0.37
0.026
0.018
-0.003
-0.003
0.012
Left vs. Right
1054
983
71
0
73
295
265
214
24
6
106
704
236
238
350
624
-0.002
-0.008
-0.007
-0.008
-1.0
-0.09
0.002
-0.024
-0.022
-0.004
-0.001
-0.001
-0.002
-0.9
-0.002
247.2
0.012
-0.055
0.1
-0.02
-0.03
-0.02
-0.20
-0.16
-0.216
-0.024
0.014
0.001
-0.275
Leading Off vs. Two Outs
183
174
9
0
23
47
49
35
7
2
11
99
-20
95
55
377
-0.026
-0.018
0.002
-0.027
-3.2
-0.40
-0.022
-0.063
-0.085
-0.049
-0.055
-0.025
-0.034
-14.3
-0.034
28.8
0.001
-
1.6
-0.07
-0.14
0.15
-1.14
1.87
-0.094
-0.039
-0.009
0.024
0.475
2011 vs. 2012
5
-11
17
-1
5
-
-
5
6
5
2
40
3
8
18
-
-0.010
0.038
0.047
0.047
-0.2
-0.10
0.054
0.083
0.137
0.017
0.075
0.063
0.025
15.2
0.011
7.9
0.038
-
-0.4
-0.00
0.00
0.01
-0.02
0.05
-
-
0.028
0.008
-1.225
2012 vs. 2013
49
30
17
2
-2
47
9
-19
6
-1
-8
-42
-25
-25
-22
-26
0.007
-0.056
-0.056
-0.074
-0.7
-0.09
-0.040
-0.109
-0.149
-0.058
-0.028
-0.043
0.021
14.0
-0.038
-11.9
-0.007
-0.030
1.5
0.01
-0.06
-0.06
-0.10
-0.10
0.239
-0.038
0.022
-0.008
-0.518
2011 vs. 2012
2011 Vs 2012 Legend
B
Bats
ROB
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.
Runners on Base is the total number of runners on base at the time the batter's plate appearances began.
CR
Contact Rate = (AB - K) / AB
BA
Batting Average = H / AB
BABIP
Batting Average on Balls In Play = [H - HR] / [AB - K - HR + SF]. BABIP is indication of how well a hitter places the ball combined with their speed.
BACON
Batting Average on Contact = H / [AB - K + SF]. BACON is BABIP but with home runs included.
SPD
Speed Score attempts to measure speed using a combination of doubles, triples and runs scored other than by home runs.
RS%
Runs Scoring Percentage is the percentage of times that a baserunner scored a run. (R - HR) / (H + BB - HR)
OBP
On-base Percentage = (H + BB) / (AB + BB + SF)
SLG
Slugging Percentage = TB / AB
OPS
On-base Plus Slugging = OBP + SLG
ISO
Isolated Power estimates a hitters raw power. The PECOTA formula, which weights doubles and triples evenly ([2B + 3B + (3 * HR)] / AB), is not used here because only doubles and triples are a poor indicator of power in wiffleball. [(3 * HR) / AB] is used here instead.
SecA
Secondary Average is a ratio of bases gained to at bats using the formula: (TB - H + BB) / AB.
Weighted Runs Above Average per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance compared to the average player.
wRAA
Weighted Runs Above Average measures the total number of runs a player contributed to their team compared to the average player.
wRC/PA
Weighted Runs Created per Plate Appearance measures the average number of runs a player contributed to their team in a single plate appearance.
wRC
Weighted Runs Created measures the total number of runs a player contributed to their team.
TTO%
Three True Outcomes Percentage is the percentage of plate appearances that result in one of the three defense-independent batting events: home runs, walks, and strikeouts.
OBI%
Others Batted In Percentage is a measure of a hitter's performance with runners on base. It is the percentage of runners that the hitter caused to score (not including themselves via Home Runs) compared to the runners that were on base for the hitter. The formula is: (RBI - HR) / ROB.
Go/Fo
Ground ball to fly ball ratio is: Groundouts / Flyouts.